Intelligent CNC Laser Cutting and Milling Working Center

Intelligent CNC Laser Cutting and Milling Working Center Main Features

1.High efficiency: 45-degree saw blade servo feed ensures high-speed and uniform cutting, high cutting efficiency and good surface finish.

2.The saw blade is separated with the cutting surface when returns, to avoid sweeping the profile, improve the cutting surface finish and avoid burrs, and the service life of saw blade can be increased more than 300%.

3.Double-sided laser engraving, accurate positioning and high efficiency.

4.High laser processing efficiency:equipped with laser cutting device on rear side, the power can be adjusted according to the profile thickness, good cutting quality.According to the process requirement, it can be auto exchanged engraving or cutting status.

5.Front side and up and down drilling and milling, can mill holes in all directions.

6.Large range: cutting length 350~6500mm, width 150mm, height 150mm

7.High power: Equipped with a 3KW direct-coupled motor, the efficiency of cutting profiles with thermal insulation materials is 30% higher than that of 2.2KW

8.High precision: One piece casting main engine base and cutting mechanism, 3 fixed angles: 2 45° + 1 90°, cutting length error 0.1mm, cutting surface flatness ≤ 0.10mm, cutting angle error 5′

9. There is no need to consider the section of the profile (the Z-shaped sash and the conversion frame are also okay), no need to customize the back-up plate, and no need to consider the height of the profile. The patented "Z"-shaped sash, double-layer fixture avoids the pressure of the "Z"-shaped fan. Tilting occurs during tightening.

10.It has capacity statistics, equipment status and time statistics.

11.It has remote service function(maintenance and training), reduce downtime, improve service efficiency and equipment utilization rate.

Data import mode:

1. Software docking: online with ERP software, such as Klaes, Jopps, Zhujiang, Mendaoyun, zaoyi, Xinger and Changfeng, etc.

2. Network/USB flash disk import: import the processing data directly through network or USB disk.

3. Manual input.

Others；

1. The cutting unit is fully enclosed to protect, low noise, safety, and environmental protection.

2. Equipped with auto scrap collector, the waste scraps are transported to waste container by conveyor belt, reduce cleaning frequency and improve work efficiency.

3. The scrap collector is set on the side of the main engine, saving space, and maintenance convenient.

4. Different types of profiles can be placed for processing according to the screen prompts.

Main Parameters Details: